Journal Articles

2020

Khan, W. N., Kumar, J., & Chhibber, R. (2020; In press). High-temperature wettability study of mineral waste added CaO–CaF2–SiO2 and CaO–TiO2–SiO2-based electrode coating for offshore welds. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. ISSN: 1464-4207. https://doi.org/10.1177/1464420720906438

Kumar, P., & Pratiher, B. (2020; In press). Position analysis and nonlinear phenomena of flexible manipulator with generic payload mounted on a moving base. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics. ISSN: 1464-4193. https://doi.org/10.1177/1464419320901389

Mahajan, S., Kumar, J., & Chhibber, R. (2020; In press). High-Temperature Wettability Investigations on Laboratory-Developed CaO-CaF2-SiO2 -Al2O3 Flux System-Based Welding Electrode Coatings for Power Plant Applications. Silicon. ISSN: 1876-9918. https://doi.org/10.1007/s12633-019-00374-4

Monde, A. D., Chawla, O., Kumar, V., Karagadde, S., & Chakraborty, P. R. (2020). Shrinkage induced flow during directional solidification of pure substance in a bottom cooled cavity: A study on flow reversal phenomena. Physics of Fluids, 32(4), 047104. ISSN: 1070-6631. https://doi.org/10.1063/5.0002953

Phadatare, H. P., & Pratiher, B. (2020; In press). Dynamic stability and bifurcation phenomena of an axially loaded flexible shaft-disk system supported by flexible bearing. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 0954406220911957. ISSN:0954-4062. https://doi.org/10.1177/0954406220911957

Phadatare, H. P., & Pratiher, B. (2020). Nonlinear modeling, dynamics, and chaos in a large deflection model of a rotor–disk–bearing system under geometric eccentricity and mass unbalance. Acta Mechanica,231(3), 907–928.ISSN: 1619-6937. https://doi.org/10.1007/s00707-019-02559-9

Thakare, J. G., Pandey, C., Mahapatra, M. M., & Mulik, R. S. (2020; In press). Thermal Barrier Coatings—A State of the Art Review. Metals and Materials International. ISSN: 2005-4149. https://doi.org/10.1007/s12540-020-00705-w

2019

Arora, N., Agarwal, A., & Desai, K. A. (2019). Modelling of static surface error in end-milling of thin-walled geometries. International Journal of Precision Technology, 8(2/3/4), 107–123. ISSN: 1755-2079. https://doi.org/10.1504/IJPTECH.2019.100947

Biswal, H. J., Vundavilli, P. R., & Gupta, A. (2019). Investigations on the effect of electrode gap variation over pulse-electrodeposition profile. IOP Conference Series: Materials Science and Engineering, 653, 012046(1-7). ISSN: 1757-899X. https://doi.org/10.1088/1757-899X/653/1/012046

Dutta, A., Salunkhe, D. H., Kumar, S., Udai, A. D., & Shah, S. V. (2019). Sensorless full body active compliance in a 6 DOF parallel manipulator. Robotics and Computer-Integrated Manufacturing, 59, 278–290. ISSN: 0736-5845. https://doi.org/10.1016/j.rcim.2019.04.010

Kumar, C., Monde, A. D., Bhattacharya, A., & Chakraborty, P. R. (2019). Modeling of dendrite growth in undercooled solution sodium acetate trihydrate. E3S Web of Conferences, 128, 01023(1-3). ISSN: 2267-1242. https://doi.org/10.1051/e3sconf/201912801023

Kumar, P., & Pratiher, B. (2019). Modal characterization with nonlinear behaviors of a two-link flexible manipulator. Archive of Applied Mechanics, 89(7), 1201-1220. ISSN: 1432-0681. https://doi.org/10.1007/s00419-018-1472-9

Kumar, P., & Pratiher, B. (2019; In press). Modal analysis and dynamic responses of a rotating Cartesian manipulator with generic payload and asymmetric load. Mechanics Based Design of Structures and Machines, 0(0), 1–20. ISSN: 1539-7734. https://doi.org/10.1080/15397734.2019.1624174

Mahajan, S., & Chhibber, R. (2019). Design and Development of Shielded Metal Arc Welding (SMAW) Electrode Coatings Using a CaO-CaF2-SiO2 and CaO-SiO2-Al2O3 Flux System. JOM, 71(7), 2435–2444. ISSN: 1543-1851. https://doi.org/10.1007/s11837-019-03494-9

Mahajan, S., & Chhibber, R. (2019). Hot corrosion studies of boiler steels exposed to different molten salt mixtures at 950°C. Engineering Failure Analysis, 99, 210224. ISSN: 1350-6307. https://doi.org/10.1016/j.engfailanal.2019.02.013

Mahajan, S., & Chhibber, R. (2019; In press). Design and development of CaO–SiO2–CaF2 and CaO–SiO2–Al2O3 based electrode coatings to weld low alloy ferritic steels for power plant applications. Ceramics International. ISSN: 0272-8842. https://doi.org/10.1016/j.ceramint.2019.08.124

Mahajan, S., & Chhibber, R. (2019; In press). Hot Corrosion Study of 9Cr–1Mo Boiler Steel Exposed to Different Molten Salt Mixtures. Transactions of the Indian Institute of Metals. ISSN: 0975-1645. https://doi.org/10.1007/s12666-019-01685-1

Monde, A. D., Bhattacharya, A., & Chakraborty, P. R. (2019). Shrinkage induced flow and free surface evolution during solidification of pure metal. E3S Web of Conferences, 128, 06011 (1-3). ISSN: 2267-1242. https://doi.org/10.1051/e3sconf/201912806011

Nighojkar, A. K., Agrawal, A. K., Singh, B., Gupta, S., Satankar, R. K., Oommen, J. M., Dave, L., Sharif, M., Soboyejo, A. B. O., & Plappally, A. (2019). Establishing correlations among pore structure, surface roughness, compressive strength, and fracture toughness of ceramic water filters local to Rajasthan, India. Desalination and Water Treatment, 157, 332–341. ISSN: 1944-3986. https://doi.org/10.5004/dwt.2019.23693

Nighojkar, A. K., Vijay, A., Kumavat, A., Gupta, S., Satankar, R. K., & Plappally, A. (2019). Use of marble and iron waste additives for enhancing arsenic and E. Coli contaminant removal capacity and strength of porous clay ceramic materials for point of use drinking water treatment. Desalination and Water Treatment, 157, 290–302. ISSN: 1944-3994. https://doi.org/10.5004/dwt.2019.23553

Pandey, C. (2019; In press). Characterization of Soft FGHAZ in P91 Weldments under Creep Exposure Condition. Steel Research International, 0(ja). ISSN: 1869-344X. https://doi.org/10.1002/srin.201900342

Pandey, C. (2019). Effect of heat treatment on mechanical behavior and microstructure feature of the thermal aged P91 steel. Materials Research Express, 6(9), 096541. ISSN: 2053-1591. https://doi.org/10.1088/2053-1591/ab2e5e

Pandey, C., Sirohi, S., Mahapatra, M. M., Kumar, P., & Bansal, K. K. (2019). Role of Heat Treatment on Grain Refinement and Microhardness of 9Cr–1Mo–V–Nb Steel. Metallography, Microstructure, and Analysis, 8(4), 472–478. ISSN: 2192-9270. https://doi.org/10.1007/s13632-019-00555-y

Sharma, B., Chhibber, R., & Mehta, R. (2019). Effect of mixing parameters, postcuring, and stoichiometry on mechanical properties of fiber reinforced epoxy–clay nanocomposites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 233(7), 1363–1374. ISSN: 1464-4207. https://doi.org/10.1177/1464420717752023

Sharma, L., & Chhibber, R. (2019). Design of CaO-SiO2-CaF2 and CaO-SiO2-Al2O3 based submerged arc fluxes for multipass bead on plate linepipe steel welds. Journal of Pressure Vessel Technology, 141(3), 031403. ISSN: 0094-9930. https://doi.org/10.1115/1.4043298

Sharma, L., & Chhibber, R. (2019; In press). Design & development of SAW fluxes using CaO–SiO2–CaF2 and CaO–SiO2–Al2O3 flux systems. Ceramics International. ISSN: 0272-8842. https://doi.org/10.1016/j.ceramint.2019.09.106

Sharma, L., & Chhibber, R. (2019; In press). Design and Development of Submerged Arc Welding Slags Using CaO-SiO2-CaF2 and CaO-SiO2-Al2O3 System. Silicon. ISSN: 1876-9918. https://doi.org/10.1007/s12633-019-0068-5

Sharma, L., & Chhibber, R. (2019). Effect of Heat Treatment on Mechanical Properties and Corrosion Behaviour of API X70 Linepipe Steel in Different Environments. Transactions of the Indian Institute of Metals, 72(1), 93-110. ISSN: 0975-1645. https://doi.org/10.1007/s12666-018-1465-y

Sharma, L., & Chhibber, R. (2019; In press). Experimental Investigation of Thermo-Physical Properties of SAW Slag. Silicon. ISSN: 1876-9918. https://doi.org/10.1007/s12633-019-00286-3

Thakare, J. G., Pandey, C., Mulik, R. S., & Mahapatra, M. M. (2019). Microstructure and mechanical properties of D-Gun sprayed Cr3C2-NiCr coating on P91 steel subjected to long term thermal exposure at 650 oC. Materials Research Express, 6(11), 1165h1. ISSN: 2053-1591. https://doi.org/10.1088/2053-1591/ab5265

Vaishnav, S., Agarwal, A., & Desai, K. A. (2019; In press). Machine learning-based instantaneous cutting force model for end milling operation. Journal of Intelligent Manufacturing. ISSN: 1572-8145. https://doi.org/10.1007/s10845-019-01514-8

2018

Boddupalli, N., Yadav, N. K., & Chandra, L. (2018). The unsteady flow features behind a heliostat in a narrow channel at a high Reynolds number: Experiment and large Eddy simulation. International Journal of Mechanical Sciences, 136, 424–438. ISSN: 0020-7403. https://doi.org/10.1016/j.ijmecsci.2017.12.048

Gupta, S., Satankar, R. K., Kaurwar, A., Aravind, U., Sharif, M., & Plappally, A. (2018). Household production of ceramic water filters in Western Rajasthan, India. International Journal for Service Learning in Engineering, Humanitarian Engineering and Social Entrepreneurship, 13(1), 53–66. ISSN: 1555-9033. https://doi.org/10.24908/ijsle.v13i1.11150

Jain, A., Sharma, A., Borana, S. L., Ravindra, B., & Mangalhara, J. P. (2018). Study and Analysis of Exhaust Emission of Diesel Vehicles using Thermal IR Imagers. Defence Science Journal, 68(6), 533–539. ISSN: 0976464X. https://doi.org/10.14429/dsj.68.12701

Joshi, R., & Chhibber, R. (2018). Design and development of SiO2-Al2O3-B2O3-Na2O based glass sealant for the glass-metal joint. Ceramics International, 44(16), 19084-19098. ISSN: 0272-8842. https://doi.org/10.1016/j.ceramint.2018.07.172

Joshi, R., & Chhibber, R. (2018). Effect of SiO2/B2O3 ratio on the thermophysical and wetting properties of borosilicate glass sealant for glass-metal joint. Journal of Materials Processing Technology, 259, 186–194. ISSN: 0924-0136. https://doi.org/10.1016/j.jmatprotec.2018.04.028

Joshi, R., & Chhibber, R. (2018). Failure study of compression glass-metal joint for parabolic trough receiver tube application. Materials Today: Proceedings, 5(7, Part 1), 14847–14851. ISSN: 2214-7853. https://doi.org/10.1016/j.matpr.2018.04.017

Joshi, R., & Chhibber, R. (2018). High Temperature Wettability Studies for Development of Unmatched Glass-Metal Joints in Solar Receiver Tube. Renewable Energy, 119, 282-289. ISSN: 0960-1481. https://doi.org/10.1016/j.renene.2017.12.020

Kumar, S. S., Chhibber, R., & Mehta, R. (2018). PEEK Composite Scaffold Preparation for Load Bearing Bone Implants. Materials Science Forum, 911, 77–82. ISSN: 1662-9752. https://doi.org/10.4028/www.scientific.net/MSF.911.77

Moges, T. M., Desai, K. A., & Rao, P. V. M. (2018). Modeling of cutting force, tool deflection, and surface error in micro-milling operation. The International Journal of Advanced Manufacturing Technology, 98(9–12), 2865–2881. ISSN: 1433-3015. https://doi.org/10.1007/s00170-018-2415-x

Monde, A. D., & Chakraborty, P. R. (2018). Prediction of Cooling Curves for Controlled Unidirectional Solidification under the Influence of Shrinkage: A Semi-analytical Approach. Metallurgical and Materials Transactions B, 49 (6), 3306-3316. ISSN: 1543-1916. https://doi.org/10.1007/s11663-018-1420-7

Sharma, B., Chhibber, R., & Mehta, R. (2018). Seawater ageing of glass fiber reinforced epoxy nanocomposites based on silylated clays. Polymer Degradation and Stability, 147, 103–114. ISSN: 0141-3910. https://doi.org/10.1016/j.polymdegradstab.2017.11.017

Sharma, L., & Chhibber, R. (2018; In press). Design and development of submerged arc welding fluxes using TiO2-SiO2-CaO and SiO2-CaO-Al2O3 flux system. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN: 2041-3009. https://doi.org/10.1177/0954408918794036

Sharma, L., & Chhibber, R. (2018; In press). Mechanical properties and hydrogen induced cracking behaviour of API X70 SAW weldments. International Journal of Pressure Vessels and Piping. ISSN: 0308-0161. https://doi.org/10.1016/j.ijpvp.2018.06.013

Verma, R. N., Kumar, R., Dixit, A., & Chandra, L. (2018). A low temperature water-cooled radiation calorimeter for estimation of concentrated solar irradiance. Solar Energy, 167, 194–209. ISSN: 0038-092X. https://doi.org/10.1016/j.solener.2018.04.006

Verma, V. K., Tripathi, B., Rana, K. B., & Chhibber, R. (2018). Factors Affecting the Performance of Glass–Metal Seal of Solar Receiver Tubes: A Review. International Journal of Applied Engineering Research, 13(8), 12. ISSN: 0973-9769. http://www.ripublication.com/ijaerspl2018/ijaerv13n8spl_18.pdf

2017

Aggarwal, H. K., Chhibber, R., Arora, N., & Mehta, R. (2017). Experimental Analysis of Thermal Fatigue in Bimetallic Welds. Materials Science Forum, 880, 124–127. ISSN: 1662-9752. https://doi.org/10.4028/www.scientific.net/MSF.880.124

Boddupalli, N., Singh, G., Chandra, L., & Bandyopadhyay, B. (2017). Dealing with dust – Some challenges and solutions for enabling solar energy in desert regions. Solar Energy, 150, 166–176. ISSN: 0038-092X. https://doi.org/10.1016/j.solener.2017.04.032

Chakraborty, P. R. (2017). Enthalpy porosity model for melting and solidification of pure-substances with large difference in phase specific heats. International Communications in Heat and Mass Transfer, 81, 183-189. ISSN: 0735-1933. https://doi.org/10.1016/j.icheatmasstransfer.2016.12.023

Chakraborty, P. R., Hiremath, K. R., & Sharma, M. (2017). Evaluation of evaporation coefficient for micro-droplets exposed to low pressure: A semi-analytical approach. Physics Letters A, 381 (5), 413–416. ISSN: 0375-9601. https://doi.org/10.1016/j.physleta.2016.11.036

Doughty, B., Srinivasan, S. G., Bryantsev, V. S., Lee, D., Lee, H. N., Ma, Y.-Z., & Lutterman, D. A. (2017). Absolute Molecular Orientation of Isopropanol at Ceria (100) Surfaces: Insight into Catalytic Selectivity from the Interfacial Structure. The Journal of Physical Chemistry C. ISSN: 1932-7447. https://doi.org/10.1021/acs.jpcc.7b03272

Hafez, A. H. A., Mithun, P., Anurag, V. V., Shah, S. V., & Krishna, K. M. (2017-05). Reactionless visual servoing of a multi-arm space robot combined with other manipulation tasks. Robotics and Autonomous Systems, 91, 1-10. ISSN: 0921-8890. https://doi.org/10.1016/j.robot.2016.12.010

Moges, T. M., Desai, K. A., & Rao, P. V. M. (2017). On modeling of cutting forces in micro-end milling operation. Machining Science and Technology, 21(4), 562–581. ISSN: 1532-2483. https://doi.org/10.1080/10910344.2017.1336179

Monde, A. D., & Chakraborty, P. R. (2017; In press). 1-D diffusion based solidification model with volumetric expansion and shrinkage effect: A semi-analytical approach. Physics Letters A. ISSN: 0375-9601. https://doi.org/10.1016/j.physleta.2017.08.033

Phadatare, H. P., Maheshwari, V., Vaidya, K. S., & Pratiher, B. (2017). Large Deflection Model for Nonlinear Flexural Vibration Analysis of a Highly Flexible Rotor-bearing System. International Journal of Mechanical Sciences. 134, 532-544. ISSN: 0020-7403. https://doi.org/10.1016/j.ijmecsci.2017.09.039

Phadatare, H., Choudhary, B., & Pratiher, B. (2017). Evaluation of nonlinear responses and bifurcation of a rotor-bearing system mounted on moving platform. Nonlinear Dynamics, 1–19. ISSN: 1573-269X. https://doi.org/10.1007/s11071-017-3677-9

Prasanth, C., Harsha, C. S., & Pratiher, B. (2017; In press). Electrostatic pull-in analysis of a nonuniform micro-resonator undergoing large elastic deflection. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN: 0954-4062. https://doi.org/10.1177/0954406217736079

Rao, S. S., Chhibber, R., Arora, K. S., & Shome, M. (2017). Resistance spot welding of galvannealed high strength interstitial free steel. Journal of Materials Processing Technology, 246, 252-261. ISSN: 0924-0136. https://doi.org/10.1016/j.jmatprotec.2017.03.027

Shah, S. V., Saha, S. K., & Dutt, J. K. (2017). A new perspective towards decomposition of the generalized inertia matrix of multibody systems. Multibody System Dynamics, 1–34. ISSN: 1573-272X. https://doi.org/10.1007/s11044-017-9581-8

2016

Bhandari, D., Chhibber, R., Arora, N., & Mehta, R. (2016). Investigation of TiO2–SiO2–CaO–CaF2 based electrode coatings on weld metal chemistry and mechanical behaviour of bimetallic welds. Journal of Manufacturing Processes, 23, 61–74. ISSN: 1526-6125. http://doi.org/10.1016/j.jmapro.2016.05.013

Harsha, C. S., Prasanth, C. S. R., & Pratiher, B. (2016). Effect of Squeeze Film Damping and AC Actuation Voltage on Pull-in Phenomenon of Electrostatically Actuated Microswitch. Procedia Engineering, 144, 891–899. ISSN: 1877-7058. http://doi.org/10.1016/j.proeng.2016.05.108

Harsha, C. S., Prasanth, C. S., & Pratiher, B. (2016). Prediction of pull-in phenomena and structural stability analysis of an electrostatically actuated microswitch. Acta Mechanica, 1–18. ISSN: 1619-6937. http://doi.org/10.1007/s00707-016-1633-2

James, F., Shah, S. V., Singh, A. K., Krishna, K. M., & Misra, A. K. (2016). Reactionless Maneuvering of a Space Robot in Precapture Phase. Journal of Guidance, Control, and Dynamics, 39(10), 2419-2425. ISSN: 1533-3884. https://doi.org/10.2514/1.G001828

Moges, T. M., Desai, K. A., & Rao, P. V. M. (2016). Improved Process Geometry Model with Cutter Runout and Elastic Recovery in Micro-end Milling. Procedia Manufacturing, 5, 478–494. ISSN: 2351-9789. https://doi.org/10.1016/j.promfg.2016.08.040

Phadatare, H. P., & Pratiher, B. (2016). Nonlinear Frequencies and Unbalanced Response Analysis of High Speed Rotor-Bearing Systems. Procedia Engineering, 144, 801–809. ISSN: 1877-7058. http://doi.org/10.1016/j.proeng.2016.05.089

Rajpurohit, D. S. & Chhibber, R. (2016). Design Optimization of Two Input Multimode Applicator for Efficient Microwave Heating. International Journal of Advances in Microwave Technology, 1 (3), 68-73. ISSN: 2456-4346. http://ijamt.com/abstract.php?article_id=1676

Saha, A. K., Kumar, R., Usmani, B., Chandra, L., & Dixit, A. (2016). Development Of Nickel Modified Fe 3 O 4 Solar Selective Coatings for Solar Absorber Applications. Advanced Materials Proceedings, 1(2), 140–145. ISSN: 2002-4428. https://doi.org/10.5185/amp.2016/205

Saini, A., Chhibber, R., & Chattopadhyay, A. (2016). Effect of combined fatigue and hygrothermal loading on structural properties of E-glass/polymers. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN: 0954-4062. http://doi.org/10.1177/0954406216644268

Sharma, B., Chhibber, R., & Mehta, R. (2016). Effect of surface treatment of nanoclay on the mechanical properties of epoxy/glass fiber/clay nanocomposites. Composite Interfaces, 23(7), 623-640. ISSN: 0927-6440. http://doi.org/10.1080/09276440.2016.1165522

Singla, Y. K., Chhibber, R., & Dutta, B. K. (2016). Influence of Friction Welding Parameters on the Tensile Strength of Bimetallic Weld Joints. MMU Journal of Management & Technology, 1(1), 41–49. ISSN: 2455-4456. http://journal.mmambala.org/wp-content/uploads/2016/02/Vol-1-Issue-1-PP-41-49.pdf

Singla, Y. K., Chhibber, R., Avdesh, Goyal, S., & Sharma, V. (2016). Influence of single and dual particle reinforcements on the corrosion behavior of aluminum alloy based composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications. ISSN: 1464-4207. http://doi.org/10.1177/1464420716638111

Teja, H., & Shah, S. V. (2016). Learning inverse kinematic solutions of redundant manipulators using multiple internal models. In 2016 6th IEEE International Conference on Biomedical Robotics and Biomechatronics (BioRob) (pp. 1371–1371). http://doi.org/10.1109/BIOROB.2016.7523824

2015

Desai, K. A., & Rao, P. V. M. (2015). Machining of curved geometries with constant engagement tool paths. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. http://doi.org/10.1177/0954405415616787

Patidar, D., Tiwari, S., Sharma, P. K., Chandra, L., & Shekhar, R. (2015). Open Volumetric Air Receiver Based Solar Convective Aluminum Heat Treatment Furnace System. Energy Procedia, 69, 506–517. http://doi.org/10.1016/j.egypro.2015.03.059

Patidar, D., Tiwari, S., Sharma, P., Pardeshi, R., Chandra, L., & Shekhar, R. (2015). Solar Convective Furnace for Metals Processing. JOM, 1–9. http://doi.org/10.1007/s11837-015-1633-z

Pratap, V., Vijay, V., Ravindra, B., & Siddhartha, M. (2015). Impact of Trend and Seasonality in Forecasting of 5 MW PV Plant Generation using Single Exponential Smoothing Method. International Journal of Computer Applications, 130(1), 5–9. ISSN: 0975-8887. http://doi.org/10.5120/ijca2015906840

Sharma, P., Sarma, R., Chandra, L., Shekhar, R., & Ghoshdastidar, P. S. (2015). Solar Tower Based Aluminum Heat Treatment System: Part I. Design and Evaluation of an Open Volumetric Air Receiver. Solar Energy, 111, 135–150. ISSN: 0038-092X. http://doi.org/10.1016/j.solener.2014.10.035

Singh, G., Saini, D., & Chandra, L. (2015). On the evaluation of a cyclone separator for cleaning of open volumetric air receiver. Applied Thermal Engineering. http://doi.org/10.1016/j.applthermaleng.2015.10.087

Singh, G., Saini, D., Yadav, N., Sarma, R., Chandra, L., & Shekhar, R. (2015). Dust Deposition Mechanism and Cleaning Strategy for Open Volumetric Air Receiver Based Solar Tower Sub-systems. Energy Procedia, 69, 2081–2089. http://doi.org/10.1016/j.egypro.2015.03.222

Singla, Y. K., Chhibber, R., Bansal, H., & Kalra, A. (2015). Wear Behavior of Aluminum Alloy 6061-Based Composites Reinforced with SiC, Al2O3, and Red Mud: A Comparative Study. JOM, 67(9), 2160–2169. http://doi.org/10.1007/s11837-015-1365-0

2014

Choudhary, G., Sharma, R. K., & Plappally, A. K. (2014). Local material composite sintered systems for fluoride removal. Desalination and Water Treatment, 55(10), 2626-2637. http://doi.org/10.1080/19443994.2014.957936

Gupta, S., Singh, R., Chakraborty, P. R., Sharma, R. K., Soboyejo, A. B. O., Wei, X., & Plappally, A. K. (2014). Multi-variable approach to determine treatment efficiency of wetland: size effect and electro-kinetic effects. Desalination and Water Treatment, 0(0), 1–11. http://doi.org/10.1080/19443994.2014.958288

Jindal, S., Chhibber, R., & Mehta, N. P. (2014). Modeling flux chemistry for submerged arc weldments of high-strength low-alloy steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 0(0), 1–14. doi:10.1177/0954405413517364

Jindal, S., Chhibber, R., & Mehta, N. P. (2014). Prediction of element transfer due to flux and optimization of chemical composition and mechanical properties in high-strength low-alloy steel weld. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN: 2041-2975. http://doi.org/10.1177/0954405414531113

Pratiher, B. (2014). Stability and bifurcation analysis of an electrostatically controlled highly deformable microcantilever-based resonator. Nonlinear Dynamics, 78(3), Pp.1781-1800. doi:10.1007/s11071-014-1543-6

Sharma, P., Sarma, R., Chandra, L., Shekhar, R., & Ghoshdastidar, P. S. (2014). On the Design and Evaluation of Open Volumetric Air Receiver for Process Heat Applications. Energy Procedia, 57, 2994–3003. ISSN: 1876-6102. http://doi.org/10.1016/j.egypro.2014.10.335

Singh, R., Gupta, S., Raman, S., Chakraborty, P. R., Sharma, P., Sharma, R. K., … Plappally, A. K. (2014). Comparative analysis of hydrodynamics of treatment wetlands using finite volume models with empirical data. Desalination and Water Treatment, 0(0), 1–26. http://doi.org/10.1080/19443994.2014.957957

Yadav, A., Kumar, G., Soboyejo, A. B. O., Gaur, R. S., Tiwari, S., & Plappally, A. (2014). Empirical models for change in pH and temperature within gravity-based reactor columns. Desalination and Water Treatment, 0(0), 1–15. http://doi.org/10.1080/19443994.2014.959736

2013

Chakraborty, P. R., & Dutta, P. (2013). Study of Freckles Formation During Directional Solidification Under the Influence of Single-Phase and Multiphase Convection. Journal of Thermal Science and Engineering Applications, Vol. 5(2), Pp.021004(1–13). doi:10.1115/1.4023601

Jindal, S., Chhibber, R., & Mehta, N. P. (2013). Effect of Flux Constituents and Basicity Index on Mechanical Properties and Microstructural Evolution of Submerged Arc Welded High Strength Low Alloy Steel. Materials Science Forum, 738-739, 242–246. doi:10.4028/www.scientific.net/MSF.738-739.242

Jindal, S., Chhibber, R., & Mehta, N. P. (2013). Effect of welding parameters on bead profile, microhardness and H2 content in submerged arc welding of high-strength low-alloy steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228(1), 82–94. doi:10.1177/0954405413495846

Jindal, S., Chhibber, R., & Mehta, N. P. (2013). Investigation on flux design for submerged arc welding of high-strength low-alloy steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(3), 383–395. doi:10.1177/0954405412468993

Plappally, A. K. et. al. (2013). Water Use and Related Costs at Households in Western and Northern Parts of India. Hydrology Current Research, Vol. 4(3), Pp. 158(1-9). doi:10.4172/2157-7587.1000158

Plappaly, A. K., & Hasija, A. (2013). Water Use and Related Costs at Households in Western and Northern Parts of India. Journal of Waste Water Treatment & Analysis, 04(03). doi:10.4172/2157-7587.1000158

Yakub, I., Plappally, A. K., Leftwich, M., Malatesta, K., Friedman, K., Obwoya, S., … Soboyejo, W. (2013). Porosity, Flow, and Filtration Characteristics of Frustum-Shaped Ceramic Water Filters. Journal of Environmental Engineering, 139(7), 986–994. doi:10.1061/(ASCE)EE.1943-7870.0000669

2012

Chhibber, R., Singh, H., Arora, N., & Dutta, B. K. (2012). Micromechanical modelling of reactor pressure vessel steel. Materials & Design, 36, 258–274. doi:10.1016/j.matdes.2011.10.027

Chhibber, R., Singla, Y. K., & Dutta, B. K. (2012). Optimization of Process Parameters for Friction Welding of Bimetallic Welds. Advanced Materials Research, 585, 440–444. doi:10.4028/www.scientific.net/AMR.585.440

Dwivedy, S. K., & Pratiher, B. (2012). Reply to the “Comments on parametric instability of a cantilever beam with magnetic field and periodic axial load.” Journal of Sound and Vibration, 331(6), 1465–1466. doi:10.1016/j.jsv.2011.11.013

Plappally, A. K., & Lienhard V, J. H. (2012). Energy requirements for water production, treatment, end use, reclamation, and disposal. Renewable and Sustainable Energy Reviews, 16(7), 4818–4848. doi:10.1016/j.rser.2012.05.022

Plappally, A. K., & Lienhard, J. H. (2012). Costs for water supply, treatment, end-use and reclamation. Desalination and Water Treatment, 51(1-3), 200–232. doi:10.1080/19443994.2012.708996

Pratiher, B. (2012). Tuning the Nonlinear Behaviour of Resonant MEMS Sensors Actuated Electrically. Procedia Engineering, 47, 9–12. doi:10.1016/j.proeng.2012.09.071

Pratiher, B., & Bhowmick, S. (2011). Nonlinear dynamic analysis of a Cartesian manipulator carrying an end effector placed at an intermediate position. Nonlinear Dynamics, 69(1-2), 539–553. doi:10.1007/s11071-011-0285-y

Roelofs, F., Gopala, V. R., Chandra, L., Viellieber, M., & Class, A. (2012). Simulating fuel assemblies with low resolution CFD approaches. Nuclear Engineering and Design, 250, 548–559. doi:10.1016/j.nucengdes.2012.05.029

Sharma, K., Khandelwal, H. K., Bhasin, V., & Chhibber, R. (2012). Application of Ball Indentation Technique for Mechanical Properties Estimation of Bi-Metallic Weld. Advanced Materials Research, 585, 342–346. doi:10.4028/www.scientific.net/AMR.585.342


Conference Papers

2020

Kumar, D., & Ravindra, B. (2020). Gap-Filling Techniques for Solar Radiation Data and Their Role in Solar Resource Assessment. In S. Singh & V. Ramadesigan (Eds.), Advances in Energy Research, Vol. 1 (pp. 555–564). Singapore: Springer. ISBN: 9789811526664. https://doi.org/10.1007/978-981-15-2666-4_53

Verma, A., Satish, & Chakraborty, P. R. (2020). Parametric Study of Ammonia-Activated Carbon Two-Bed Adsorption Refrigeration System. In S. Singh & V. Ramadesigan (Eds.), Advances in Energy Research, Vol. 1 (pp. 481–494). Singapore: Springer. ISBN: 9789811526664. https://doi.org/10.1007/978-981-15-2666-4_47

2019

Malviya, M., & Desai, K. A. (2019). Build Orientation Optimization for Strength Enhancement of 3-D Printed Parts Using Machine Learning-based Algorithm. In Proceedings of CAD’19 (pp. 232–236). Singapore: CAD Solutions LLC. https://doi.org/10.14733/cadconfP.2019.232-236

Tallamraju, R., Salunkhe, D. H., Rajappa, S., Ahmad, A., Karlapalem, K., & Shah, S. V. (2019). Motion Planning for Multi-Mobile-Manipulator Payload Transport Systems. In 2019 IEEE 15th International Conference on Automation Science and Engineering (CASE) (pp. 1469–1474). Vancouver, BC, Canada: IEEE. ISBN: 978-1-7281-0356-3. https://doi.org/10.1109/COASE.2019.8842840

2018

Sakthivel, T., & Venkatesan, C. (2018). Estimation of handling quality parameters of a rotorcraft using open-loop linearized and nonlinear flight dynamic models (Vol. 2, pp. 867–879). Presented at the 44th European Rotorcraft Forum 2018, ERF 2018, Delft, Netherlands: Netherlands Association of Aeronautical Engineers. ISBN: 978-1-5108-7964-5. Retrieved from https://www2.scopus.com/inward/record.uri?eid=2-s2.0-85069539270&partnerID=40&md5=9abc4e2a5cb62a151be7c815e5a751a7

Singh, G., Kumar, R., Dixit, A., & Chandra, L. (2018). Thermal and Materials Perspective on the Design of Open Volumetric Air Receiver for Process Heat Applications. In Himanshu Tyagi, Avinash K Agarwal, Prodyut Ranjan Chakraborty, & Satvasheel Powar (Eds.), Applications of Solar Energy (pp. 113–127). Springer, Singapore. ISBN: 978-981-10-7206-2. https://doi.org/10.1007/978-981-10-7206-2_7

2017

Agarwal, M., Shrivastava, H. V., Desai, K. A., & Shah, S. V. (2017). A Novel Path Planning Approach for Multi-Directional 3-D Printing. In 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2017) (p. 4). IIT Madras, Chennai: COPEN. ISBN: 978-93-80689-28-9. http://www.copen.ac.in/proceedings/copen10/copen/22.revised_manuscript_484.pdf

Arora, N., Agarwal, A., & Desai, K. A. (2017). Modeling of Static Surface Error in End-Milling of Thin-Walled Geometries. In 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2017) (p. 5). IIT Madras, Chennai: COPEN. ISBN: 978-93-80689-28-9. http://www.copen.ac.in/proceedings/copen10/copen/197.pdf

Mukherjee, S. (2017). Design of Substrate Integrated Coaxial Line (SICL) fed dipole antenna for K band application. In 2017 IEEE Applied Electromagnetics Conference (AEMC) (pp. 1–2). Aurangabad, India: IEEE. ISBN: 978-1-5386-2393-0. https://doi.org/10.1109/AEMC.2017.8325643

Raina, D., & Shah, S. V. (2017). Impact modeling and estimation for multi-arm space robot while capturing tumbling orbiting objects. In Proceedings of the Advances in Robotics (p. 32:1–32:6). Delhi, India: ACM. ISBN: 978-1-4503-5294-9. https://doi.org/10.1145/3132446.3134896

Ravindra, B. (2017). Are Indian electricity consumers ready to become solar prosumers? In 2017 International Conference on Technological Advancements in Power and Energy (TAP Energy) (pp. 1–6). Kollam, India: IEEE. ISBN: 978-1-5386-4021-0. https://doi.org/10.1109/TAPENERGY.2017.8397377

Singh, G., & Chandra, L. (2017). Detrimental effects of dust deposition in pores of an open volumetric air receiver. In Proceedings of SWC2017/SHC2017 (pp. 1–10). Abu Dhabi: International Solar Energy Society. ISBN: 978-3-9814659-7-6. https://doi.org/10.18086/swc.2017.04.14

2016

Agarwal, A., & Prakash, A. (2016). Validation of LBM based on BGK on Poiseuille’s Flow and Vortex Street in a Channel Flow. In Fourth International Conferenc e On Advances in Civil, Structural and Mechanical Engineering (pp. 14–18). USA: Institute of Research

Kumar, R., Dixit, A., Chandra, L., Vyas, S., & Kumar, R. (2016). An experimental set-up for measuring thermodynamic response of low temperature phase change materials. In 2016 IEEE First International Conference on Control, Measurement and Instrumentation (CMI) (pp. 107–109). ISBN: 9781479917693. http://doi.org/10.1109/CMI.2016.7413720

Salunkhe, D. H., Sharma, S., Topno, S. A., Darapaneni, C., Kankane, A., & Shah, S. V. (2016). Design, trajectory generation and control of quadrotor research platform. In 2016 International Conference on Robotics and Automation for Humanitarian Applications (RAHA) (pp. 1–7). ISBN: 978-1-5090-5203-5. https://doi.org/10.1109/RAHA.2016.7931876

Sharma, P.R., Soni V.K., Chaudhary G., Plappally A.K., Pandey S., & Sharma R.K. (2016). Calix[4] amidocrown Molecular Sensors for Fluoride and Arsenate DetectionIn 2nd National Conference On Emerging Trends Of Research in Applied Sciences, Experimental & Computational Techniques: Vol. 4 (12). Jodhpur Institute of Engineering and Technology, Jodhpur (pp. 1-5). ISSN: 2278-0181. http://www.ijert.org/browse/conference-proceedings

Shastry, S., Avaneesh, R., Desai, K. A., & Shah, S. V. (2016). Optimal Design of a Stewart-Gough Platform for MultiDirectional Additive Manufacturing (pp. 108–112). Presented at the 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), Pune: Excel India. ISBN: 978-93-86256-27-0.

Suryan, V., Desai, K. A., & Shah, S. V. (2016). Geometric Error Identification of Three-axis Machine Tools (pp. 759–763). Presented at the 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), Pune: Excel India. ISBN: 978-93-86256-27-0.

2015

Adil, A., Badarla, V., Plappally, A. K., Bhandari, R., & Sankhla, P. C. (2015). Development of affordable ICT solutions for water conservation in agriculture. In 2015 7th International Conference on Communication Systems and Networks (COMSNETS) (pp. 1–6). http://doi.org/10.1109/COMSNETS.2015.7098716

Choudhary, B., & Pratiher, B. (2015). Numerical Studies of a Nonlinear Flexible Rotating System Under Harmonic Ground Motion. In P. Pennacchi (Ed.), Proceedings of the 9th IFToMM International Conference on Rotor Dynamics (pp. 1677–1687). Springer International Publishing. http://link.springer.com/chapter/10.1007/978-3-319-06590-8_138

Sharma, P. R., Choudhary, G., Satankar, R., Plappally, A. K. & Sharma, R. K. (2015). Development of Low Cost Polycalixarene-Clay Based Water Guards. India Water Week, 3(91).

2014

Choudhary, B., & Pratiher, B. (2014). Nonlinear responses of externally excited rotor bearing system. MATEC Web of Conferences, 16, 03006. http://doi.org/10.1051/matecconf/20141603006

Choudhary, G., Sharma R. K. & Plappally, A. K. (2014). Design and development of Sand based Water Guard, NCATAS, 1 (19). ISBN: 978-93-84648-10-7

Singh, V. P., Ravindra, B., Vijay, V., & Bhatt, M. S. (2014). A comparative performance analysis of C-Si and A-Si PV based rooftop grid tied solar photovoltaic systems in Jodhpur. In 2014 International Conference on Renewable Energy Research and Application (ICRERA) (pp. 250–255). http://doi.org/10.1109/ICRERA.2014.7016565

Singh, V. P., Vijay, V., Ravindra, B., Basu, S. J., & Chaturvedi, D. K. (2014). Ground based measurement for solar power variability forecasting using generalized neural network. In V. Vijay, S. Yadav, B. Adhikari, H. Seshadri, & D. Fulwani (Eds.), Systems Thinking Approach for Social Problems: Proceedings of 37th National Systems Conference, December 2013. Series: Lecture Notes in Electrical Engineering Vol. 327. Jodhpur: Springer Verlag

Sri Harsha, Harsha, C. S., Prasanth, C. S. R., & Pratiher, B. (2014). Modeling and non-linear responses of MEMS capacitive accelerometer. MATEC Web of Conferences, 16, 4. http://doi.org/10.1051/matecconf/20141604003

2013

Chandra, L. (2013). Solar thermal R & D at IITJ. Workshop on Energy Efficiency and Clean Energy, 13 September 2013, India Expo Center, Greater Noida, India.

Ram, P., Plappally, A.K., & George, K.J. (2013) Assessment of household water use based on personal values, social influence and daily routines of people at Jodhpur near Thar desert in India. Proceedings of Watech Asia. Mumbai

Sharma P. K., Sarma R, Chandra, L., Shekhar, R., Ghoshdastidar, P. S., On the design and evaluation of open volumetric air receiver for process heat applications. ISES Solar World Congress 2013, Cancun Mexico.

Tripathi, B., Ravindra, B., & Joshi, Y. M. (2013). Improving lubrication of EDM oil at higher shear rate & temperature with carbon nanotubes. In International Conference and Exhibition of Powder, Granule and Bulk Solids, Innovations and Applications (PGBSIA). Patiala.

Verma, R. N., Jayakumar, P., Chandra, L., Shekhar, R. (2013). Development of a Technique for Measurement of High Heat Flux. 37th National Systems Conference, 5-7 December 2013, IIT Jodhpur.

Yadav, N. K., Pala, D., & Chandra, L., On the understanding and analyses of dust deposition on heliostat. ISES Solar World Congress 2013, Cancun, Mexico.

2012

Agarwal, A., Maitri, R. V., Garg, P., & Chandra, L. (2012). Design and analyses of earth-air heat exchange systems for space cooling. In 2012 IEEE Third International Conference on Sustainable Energy Technologies (ICSET) (pp. 385–390). Kathmandu: IEEE. doi:10.1109/ICSET.2012.6357430

Pratiher, B.(2012). Tuning the Nonlinear Behaviour of Resonant MEMS Sensors Actuated Electrically. In Procedia Engineering (Vol. 47, pp. 9–12).Krakow, Poland: Wroclaw University of Technology. doi:10.1016/j.proeng.2012.09.071

Ravindra, B.(2012). Amorphous silicon based roof top and building integrated photovoltaic plants. Proceedings of National conference on advances in nanomaterials and nanotechnology for renewable energy conversion and storage devices (ANNRECSO-12). Kukas, Jaipur.

Sharma, R. K., Sharma, P., Kumar, D., Chandra, L., Kumar, P. P., & Shekhar, R. (2012). On the applications of heat and fluid flow for designing solar thermal sub-systems. Proceedings of International Congress on Renewable Energy 2012. Gandhinagar: PDPU.


Books

2020

 

2019

Tyagi, H., Agarwal, A. K., Chakraborty, P. R., & Powar, S. (Eds.). (2019). Advances in Solar Energy Research. Singapore: Springer. ISBN: 978-981-13-3302-6. https://doi.org/ 10.1007/978-981-13-3302-6

2018

Chandra, L., & Dixit, A. (Eds.). (2018). Concentrated Solar Thermal Energy Technologies: Recent Trends and Applications. Singapore: Springer. ISBN: 978-981-10-4576-9. https://doi.org/10.1007/978-981-10-4576-9

Tyagi, H., Agarwal, A. K., Chakraborty, P. R., & Powar, S. (Eds.). (2018). Applications of Solar Energy. Singapore: Springer. ISBN: 978-981-10-7206-2.  https://doi.org/10.1007/978-981-10-7206-2

 

2017

 

2016

 

2015

 

2014

 

2013

 

2012

 


Book Chapters

2020

Mukesh, B. S., Parella, R. T., Mukhopadhyay, S., & Chandra, L. (2020). Design and Development of a Concentrated Solar Water Heating System. In H. Tyagi, P. R. Chakraborty, S. Powar, & A. K. Agarwal (Eds.), Solar Energy: Systems, Challenges, and Opportunities (pp. 61–75). Singapore: Springer. ISBN: 9789811506758. https://doi.org/10.1007/978-981-15-0675-8_5

Sangwan, S., & Chakraborty, P. R. (2020). Thermodynamic Analysis of Activated Carbon–Ethanol and Zeolite–Water Based Adsorption Cooling Systems. In H. Tyagi, P. R. Chakraborty, S. Powar, & A. K. Agarwal (Eds.), Solar Energy: Systems, Challenges, and Opportunities (pp. 179–204). Singapore: Springer. ISBN: 9789811506758. https://doi.org/10.1007/978-981-15-0675-8_10

Tiwari, M., Kathrecha, D., Meena, K., Desai, K. A., & Plappally, A. K. (2020). Application of Low-Cost Natural Binders in Direct 3-D Printing of Sand Molds. In M. S. Shunmugam & M. Kanthababu (Eds.), Advances in Additive Manufacturing and Joining (pp. 337–345). Singapore: Springer. ISBN: 978-981-329-433-2. https://doi.org/10.1007/978-981-32-9433-2_30

Tyagi, H., Chakraborty, P. R., Powar, S., & Agarwal, A. K. (2020). Introduction to Solar Energy: Systems, Challenges, and Opportunities. In H. Tyagi, P. R. Chakraborty, S. Powar, & A. K. Agarwal (Eds.), Solar Energy: Systems, Challenges, and Opportunities (pp. 3–12). Singapore: Springer. ISBN: 9789811506758. https://doi.org/10.1007/978-981-15-0675-8_1

2019

Raina, D., Gora, S., & Shah, S. V. (2019). Modeling and Estimation of Closed-Loop Impact for Multi-arm Space Robot While Capturing a Tumbling Orbiting Object. In D. N. Badodkar & T. A. Dwarakanath (Eds.), Machines, Mechanism and Robotics (pp. 561–570). Springer, Singapore. ISBN: 978-981-10-8597-0. https://doi.org/10.1007/978-981-10-8597-0_48

Tyagi, H., Agarwal, A. K., Chakraborty, P. R., & Powar, S. (2019). Introduction to Advances in Solar Energy Research. In H. Tyagi, A. K. Agarwal, P. R. Chakraborty, & S. Powar (Eds.), Advances in Solar Energy Research (pp. 3–11). Singapore: Springer. ISBN: 9789811333026. https://doi.org/10.1007/978-981-13-3302-6_1

 

2018

Dirbude, S., Khalifa, N., & Chandra, L. (2018). Selective Design of an Experiment for Evaluating Air–Water Hybrid Steam Condenser for Concentrated Solar Power. In L. Chandra & A. Dixit (Eds.), Concentrated Solar Thermal Energy Technologies: Recent Trends and Applications (pp. 89–102). Singapore: Springer. ISBN: 978-981-10-4576-9. https://doi.org/10.1007/978-981-10-4576-9_9

Kumar, D., & Ravindra, B. (2018). Comments on Quality Control of Solar Radiation Data Measured at a Ground Station in Hot and Dry Zone. In L. Chandra & A. Dixit (Eds.), Concentrated Solar Thermal Energy Technologies: Recent Trends and Applications (pp. 31–40). Singapore: Springer. ISBN: 978-981-10-4576-9. https://doi.org/10.1007/978-981-10-4576-9_4

Sachdeva, M., & Chandra, L. (2018). Transient Heat Transfer Analysis in Insulated Pipe with Constant and Time-Dependent Heat Flux for Solar Convective Furnace. In L. Chandra & A. Dixit (Eds.), Concentrated Solar Thermal Energy Technologies: Recent Trends and Applications (pp. 235–249). Singapore: Springer. ISBN: 978-981-10-4576-9. https://doi.org/10.1007/978-981-10-4576-9_22

Saha, A. K., Chandra, L., & Dixit, A. (2018). Transition Metal-Based Spectrally Selective Coatings Using In-House Developed Spray System. In L. Chandra & A. Dixit (Eds.), Concentrated Solar Thermal Energy Technologies: Recent Trends and Applications (pp. 145–155). Singapore: Springer. ISBN: 978-981-10-4576-9. https://doi.org/10.1007/978-981-10-4576-9_14

Sharma, P., Chandra, L., Shekhar, R., & Ghoshdastidar, P. S. (2018). Experimental and Computational Investigation of Heat Transfer in an Open Volumetric Air Receiver for Process Heat Application. In L. Chandra & A. Dixit (Eds.), Concentrated Solar Thermal Energy Technologies: Recent Trends and Applications (pp. 103–114). Singapore: Springer. ISBN: 978-981-10-4576-9. https://doi.org/10.1007/978-981-10-4576-9_10

Shastry, S., Avaneesh, R., Desai, K. A., & Shah, S. V. (2018). Optimal Design of a Stewart–Gough Platform for Multidirectional 3-D Printing. In S. S. Pande & U. S. Dixit (Eds.), Precision Product-Process Design and Optimization (pp. 1–29). Singapore: Springer. ISBN: 978-981-10-8767-7. https://doi.org/10.1007/978-981-10-8767-7_1

Tyagi, H., Agarwal, A. K., Chakraborty, P. R., & Powar, S. (2018). Introduction to Applications of Solar Energy. In H. Tyagi, A. K. Agarwal, P. R. Chakraborty, & S. Powar (Eds.), Applications of Solar Energy (pp. 3–10). Springer, Singapore. ISBN: 978-981-10-7206-2.  https://doi.org/10.1007/978-981-10-7206-2_1

Usmani, B., Vijay, V., Chhibber, R., & Dixit, A. (2018). Effect of Growth Condition on Mechanical Properties of Zirconium Carbonitride Absorber-Based Spectrally Selective Coatings. In L. Chandra & A. Dixit (Eds.), Concentrated Solar Thermal Energy Technologies: Recent Trends and Applications (pp. 137–143). Singapore: Springer. ISBN: 978-981-10-4576-9. https://doi.org/10.1007/978-981-10-4576-9_13

2017

 

2016

 Patidar, D., Pardeshi, R., Chandra, L., & Shekhar, R. (2016). Solar Convective Furnace for Heat Treatment of Aluminium. In A. K. Saha, D. Das, R. Srivastava, P. K. Panigrahi, & K. Muralidhar (Eds.), Fluid Mechanics and Fluid Power – Contemporary Research: Proceedings of the 5th International and 41st National Conference on FMFP 2014. New Delhi: Springer India Pvt Limited. ISBN: 9788132227410.

Singh, G., Saini, D., Chandra, L., & Shekhar, R. (2016). Design of a Cyclone Separator for Collection of Dust from Volumetric Air Receiver. In A. K. Saha, D. Das, R. Srivastava, P. K. Panigrahi, & K. Muralidhar (Eds.), Fluid Mechanics and Fluid Power – Contemporary Research: Proceedings of the 5th International and 41st National Conference on FMFP 2014. New Delhi: Springer India Pvt Limited. ISBN: 9788132227410.

2015

 

2014

 

2013

 

2012

 


Reports

2020

 

2019

 

2018

 

2017

 

2016

 

2015

 

2014

 

2013

 

2012

 


Preprints

2020

 

2019

Tallamraju, R., Salunkhe, D. H., Rajappa, S., Ahmad, A., Karlapalem, K., & Shah, S. V. (2019). Motion Planning for Multi-Mobile-Manipulator Payload Transport Systems. ArXiv:1903.07758 [Cs]. http://arxiv.org/abs/1903.07758

2018

Naveen, B., Shah, S. V., & Misra, A. K. (2018). Momentum Model-based Minimal Parameter Identification of a Space Robot. ArXiv:1809.00367 [Cs]. http://arxiv.org/abs/1809.00367

Ravindra, B. (2018). Forecasting solar radiation during dust storms using deep learning. ArXiv:1808.10854 [Physics]. http://arxiv.org/abs/1808.10854

2017

Agarwal, A., Ravindra, B., & Prakash, A. (2017). Development of algorithm to model dispersed gas-liquid flow using lattice Boltzmann method. arXiv:1710.07073 [Physics]. http://arxiv.org/abs/1710.07073

Ravindra, B. (2017). Performance of a crystalline silicon photovoltaic power plant during sandstorms. arXiv:1710.03790 [Physics]. http://arxiv.org/abs/1710.03790

2016

Bhole, A., Turlapati, S. H., S, R. V., Dixit, J., Shah, S. V., & K, M. K. (2016). Design of a Robust Stair Climbing Compliant Modular Robot to Tackle Overhang on Stairs. arXiv:1607.03077 [Cs]. http://arxiv.org/abs/1607.03077